HP StoreOnce Backup - Manual (Page 165)

operation, such as copy and verify (if requested). This column also shows any error or
information messages.
To cancel a job
To cancel a job in progress, click Cancel job. You are asked to confirm that you wish to cancel the
job.
If a job is canceled during the copy, export or import phase, this cancels the transfer of data.
NOTE: There are three phases to an export job: copy, an optional verify and subsequent removal
of cartridge data from the HP D2D Backup System. If the job is cancelled during the copy process,
an error will be reported and the data will remain on the HP D2D Backup System. If it is cancelled
during the verify process, the data will be left intact on the physical tape and the data will still be
removed from the HP D2D Backup System.
If an error occurs
Errors may occur if there is a tape read/write media problem, if there is not enough capacity on
the physical cartridge or if there is a verify error. Errors may also occur if the backup application
accesses the cartridge that is being exported/imported or copied.
Errors are reported in the Job Status column on this page.
IMPORTANT: If an error occurs during export or copy, you do not lose any data. The original
data remains unaltered in its original location on the HP D2D Backup System.
Job History (Tape Attach)
This page provides details of the last 1000 tape export, import and copy jobs. The job mode
(copy, export or import), HP D2D library device, slot and cartridge barcode, physical device name,
slot and barcode, start time and job status are displayed. The most recent job is shown at the top
of a scrollable list. The final column shows the Job Status.
Tape Attach 165