HP StoreOnce Backup User Manual

Page 149

Text mode
Original mode

Figure 50 Storage—Shelves showing three disk failures (HP D2D4300/4100 Series)

IMPORTANT:

When you have two (or more) shelves, the disk failures may be on one shelf only

and the RAID status of the other shelf is shown as operational. However, you will lose all data on
the HP StoreOnce Backup System.

Power off and replace the disks, as described earlier in this chapter. When you power on again,
the disks are show as OK in the Storage-Shelves page, but the Shelf and Storage Pool both have
an invalid configuration.

If several disks fail

149