HP StoreOnce Backup - Manual (Page 158)

1. Select the slot on the HP D2D library that should be used for the copy, export or import job.
2. Select the slot on the physical tape storage device.
To select cartridges on the HP D2D library
Select the Library in the Virtual Devices list at the top of the page to display a list of the cartridges
in that library.
•
There is a Copy label in the far column next to any numbered slot that does not have a blank
cartridge.
•
There is an Export label in the far column next to the mail slot if it contains a non blank
cartridge.
•
There is an Import label in the far column next to the mail slot if it contains no cartridge.
To copy to attached tape storage device
1. Locate the cartridge that you wish to copy in the Cartridge list and click on the slot to select
it. If it is a valid slot, the Next button is active. Blank slots or slots that have already been
assigned to scheduled jobs are not valid selections for manual jobs.
2. Click on Next to display the second page of the wizard. (Or report an error if no tape storage
devices are currently attached to the HP D2D Backup System.)
3. Select the attached tape storage device from the pull-down list, the required physical slot if it
is a tape library, the required verify/compare option and whether the physical cartridge should
be unloaded after the operation completes.
NOTE: A Full Verify reads the data back after copy and compares it byte-by-byte with the
original. A Quick Verify also reads back the data, but only ensures that it can be read. It may
save some time if another tape device on the HP D2D Backup System is being accessed at
the same time as the copy operation. No Verify is the fastest option.
NOTE: On physical tape libraries the unload after completion option moves the cartridge
to the mail slot if the mail slot is enabled and empty.
4. Click Create.
5. The process checks that media is loaded in the attached tape storage device and that it is
blank. If it is not blank, you are given the option of overwriting it or canceling the job. (It is
not possible to append data.) It also checks that there is cartridge data to be copied (it may
have been subsequently moved by the backup application).
158 Extra information for G1 products