HP Integrity NonStop H-Series - Manual (Page 93)

Pathway
Subsystems
5–8 098571 Tandem Computers Incorporated
Pathway If you use DSNM to control the Pathway subsystem, you will find the following
information helpful. While it covers what you need to know about Pathway from the
viewpoint of operating DSNM, it is not exhaustive. For more details on the Pathway
subsystem, refer to the Pathway PATHCOM Reference Manual.
Object Types The Pathway subsystem contains three object types, TCP, TERM, and SERVER, which
correspond to terminal control processes, terminals, and server classes. If you issue a
command for this subsystem without specifying the object type, the object type
defaults to TERM. The hierarchical relationship between terminals and terminal
control processes is shown in Figure 5-4. Servers are on the same hierarchical level as
terminal control processes, but have no hierarchical relationship with the other object
types.
Figure 5-4. Subsystem Object Hierarchy in the Pathway Subsystem
TERM TERM
TCP SERVER
004