HP Integrity NonStop H-Series - Manual (Page 55)

STATUS Command
DSNM Commands
2–30 098571 Tandem Computers Incorporated
See “Considerations” in the INQUIRE command discussion for additional information
on how status information is obtained directly from the DSNM object database.
See Section 5, “Subsystems,” for details on possible discrepancies between INQUIRE
and STATUS.
The state modifier is ignored if the response modifier has the value of SUMMARY,
SUMMARY-BYTYPE, or SUMMARY-BYOBJECT, because these values return totals by
subsystem state.
If the SUBONLY and SUMMARY modifiers are combined for object types on the
lowest level, all counters are shown as 0. (The subordinate objects do not exist;
therefore, the summary of their counters is 0.)
The STATUS command is not appropriate for all object types; see Section 5,
“Subsystems,” for details.
DETAIL is not a valid response modifier for Tandem data communications
subsystems other than AM3270, EXPAND, SNAX, SNAXCDF, TR3271, and X25AM.
Examples The following command returns one line of status information (the default value of the
response modifier is BRIEF) for each member of the group ALL-EXPAND that is
down:
STATUS ALL-EXPAND, DOWN
A sample response to the command is:
EXPAND LINE \LONDON.$LHF Down, Stopped
EXPAND LINE \PARIS.$LHUK Down, Stopped
The following command returns detailed status information for the SNAX line
\BERLIN.$STLR and for its subordinate PUs and LUs:
STATUS BERLIN-TLR-LINE, DETAIL
A sample response to the command is:
SNAX LINE \BERLIN.$STLR Up
Line State: Active, Not in Use
PCiu: 2, 0, %20, %4
BCiu: 2, 0, %00, %0
I/O ADDR(P): 2, 0, %20, %4
I/O ADDR(B): 3, 0, %20, %4
Csm Ldev: 88
SNAX PU \BERLIN.$STLR.#TLRCC Up
Pu State: Active
SNAX LU \BERLIN.$STLR.#TLR1 Pending, Stopping
Lu State: Daclu Request Pending, Not in Session
Session State: Not in Session
Open State: Opens Forbidden
Session Id: 2