HP Integrity NonStop H-Series - Manual (Page 101)

SNAX/XF
Subsystems
5–16 098571 Tandem Computers Incorporated
Control Commands The DSNM START, STOP, and ABORT commands are similar to the SCF START,
STOP, and ABORT commands.
The INFO Command When the INFO command is issued against a SNAX/XF object, it produces a subset of
the information produced by the SCF INFO DETAIL command. Refer to the SCF
Reference Manual for SNAX/XF for more information.
The STATISTICS Command When the STATISTICS command is issued against a SNAX/XF object, it produces the
same information as the SCF STATS command, but in a different format. Refer to the
SCF Reference Manual for SNAX/XF for more information.