HP Integrity NonStop H-Series - Manual (Page 129)

Appendix A
Messages
098571 Tandem Computers Incorporated A–1
What Is in This
Appendix
This appendix explains the messages that are generated by DSNM. The error
messages are listed in order by message number.
DSNM Messages A number of the following error messages result from internal errors in the software.
These errors are caused by factors that are not under your control. If they occur, write
down the error message along with a description of the circumstances, and contact a
Tandem representative for assistance.
Following are messages generated by DSNM. They are listed in order by message
number.
- nnn Unexpected Error: text
Cause. There is an internal problem in the software that issued the message.
Effect. The effects of this problem will vary, depending on the individual situation.
Recovery. Note the error number and the message text and contact a Tandem
representative.
-30 Invalid Command For This Object
Cause. You issued a command against objects for which the command has no effect.
Effect. Your command was not executed on the objects for which it is invalid.
Recovery. Refer to Section 2, "DSNM Commands," for information on which
commands are valid for the object type you specified.
- 35 Subsystem Error
Cause. In attempting to execute your command, the subsystem generated an error.
The name of the subsystem is given in the error message.
Effect. The command was executed on all objects except the one where the error
occurred. The state of the error object is subsystem dependent.
Recovery. Refer to the subsystem documentation for error information.