HP Integrity NonStop H-Series - Manual (Page 102)

Spooler
Subsystems
098571 Tandem Computers Incorporated 5–17
Spooler If you use DSNM to monitor the Spooler subsystem, you will find the following
information helpful. While it covers what you need to know about Spooler from the
viewpoint of operating DSNM, it is not exhaustive. For more details on the Spooler
subsystem, refer to the Spooler Utilities Reference Manual.
Object Types The Spooler subsystem contains only one object type, DEV, which corresponds to
devices. Consequently, the object type does not need to be specified with the Spooler.
States Table 5-13 shows how DSNM reports Spooler subsystem states.
Table 5-13. How DSNM Reports Spooler Subsystem States
DSNM Object State Spooler Subsystem State
UP WAITING
PRINTING
PENDING DRAINING
DOWN OFFLINE
ERROR
Effects of the Hierarchy
Modifier
Table 5-14 shows the effects of the hierarchy modifier in this subsystem. The default
value is ALL.
Table 5-14. Hierarchy Modifiers in the Spooler Subsystem
Object Type Hierarchy Modifier DSNM applies the command to:
DEV ALL All of the specified devices (there are no subordinate
objects)
ONLY Only the specified devices
SUBONLY (there are no subordinate objects)
Commands The only DSNM commands that are valid for the Spooler subsystem are INQUIRE and
UPDATE.