HP Integrity NonStop H-Series - Manual (Page 50)

STATISTICS Command
DSNM Commands
098571 Tandem Computers Incorporated 2–25
that objects will produce errors and the response is not
desired.
If you do not specify a value for the error modifier, it defaults to ERROR-BRIEF.
state-modifier
restricts the scope of the command to a subset of the specified objects, depending
on their states:
UP restricts the command to the specified objects that are up.
NOT-UP restricts the command to the specified objects that are either
down or pending.
DOWN restricts the command to the specified objects that are down.
NOT-DOWN restricts the command to the specified objects that are either
up or pending.
If you do not specify a value for the state modifier, DSNM applies the command to
all objects that match your object specification, regardless of their states. For
detailed information on the state modifier, see Section 4, “Modifiers.”
RESET
If you specify RESET, DSNM directs the subsystem to reset the statistical counters
for the specified objects after executing the command. Not all counters are
necessarily reset; the subsystems determine which counters are reset for the
different types of objects.
Considerations Some subsystems only return statistics on objects that are up; for instance, Pathway
objects must be up for the Pathway subsystem to return statistics on them.
The STATISTICS command is not appropriate for all object types; see Section 5,
“Subsystems,” for details.
Examples The local node in the following examples is \LONDON.
The following command returns the operational statistics for the Expand line
\PARIS.$LHD:
STATISTICS \PARIS.$LHD
A sample response to the command is:
EXPAND LINE \PARIS.$LHD
Current Timestamp: 21 Feb 1992, 16:07:52.044
Last Resetstats Time: 21 Feb 1992, 16:03:36.351
I Frames Sent: 17
I Frames Rcvd: 8
S Frames Sent: 25
S Frames Rcvd: 39
U Frames Sent: 0
U Frames Rcvd: 0