HP Integrity NonStop H-Series User Manual
Page 40
INFO Command
DSNM Commands
098571 Tandem Computers Incorporated
2–15
The following command returns the configuration for the SNAX line
\LONDON.$SATM:
INFO $SATM ONLY
Because the ONLY modifier is specified, the command does not return any
information for the PUs and LUs under $SATM.
A sample response to the command is:
SNAX LINE \LONDON.$SATM
DUX: Full Duplex
Interface: RS232
Max Pus: 8
Max Lus: 250
Poll Interval: 0:00:00.25
Record Size: 268
Speed: 9600
Station Mode: Primary
Switched: Off
Windowed: 7
Xmit Timeout: 0:00:00.73
Auto Load: On
Charset: EBCDIC
Debug: Off
Dsr Timeout: 0:01:00.0
Flag Fill: Off
Lu Opmsg: On
Prog 9367: \LONDON.$DATA.CSS00
Prog 9370: \LONDON.$DATA.CSS00.C9312P00
Prog: \LONDON.$DATA.CSS00.C9312P00
Rexmit Timeout: 0:00:05.01
Retries: 3
Threshold: 0
Tws: Off