HP Integrity NonStop H-Series User Manual
Page 134
DSNM Messages
Messages
A–6
098571 Tandem Computers Incorporated
-105
Interface Error
Cause.
A DSNM subsystem interface responded with an error while it was executing
the command.
Effect.
Your command was not executed.
Recovery.
If the interface is not running, start it. Check the interface’s configuration
and correct it as needed. If neither of these measures solves the problem, it is
probably an internal error in the interface; contact a Tandem representative.
-106
Object Monitor Error
Cause.
The object monitor generated an error during the execution of your command.
Effect.
Your command was not executed.
Recovery.
If the object monitor is not running, start it. Check the object monitor’s
configuration and correct it as needed. If neither of these measures solves the problem,
it is probably an internal error in the interface; contact a Tandem representative.
-193
Invalid Manager
Cause.
Your command includes the name of manager or supervisor process, which is
not permitted by the subsystem.
Effect.
Your command was not executed.
Recovery.
Retype the command without a manager or supervisor process.
-194
Invalid System
Cause.
Your command includes a node name that is either misspelled or not defined to
DSNM.
Effect.
Your command was not executed.
Recovery.
Retype the command with a valid node name.