HP Intelligent Management Center Licenses - Manual (Page 96)

•
This year: The average performance data collected from 00:00:00 on January 1st of this year
to the current time. If the current time is 24.12.06 15:30:30, the performance data of this
year is the average data collected from 01.01.06 00:00:00 to 24.12.06 15:30:30.
•
Customized data: The average performance data collected from start time of Customized data
to end time of Customized data.
SA traffic report
SA traffic report displays traffic data of a single SA. The data includes performance level value
and statistics of an SA. The traffic data can be displayed in table, line chart, or bar chart, and
defaults to line chart.
Operation procedure
1. Click the Service tab, click MPLS VPN Manager, and then click Traffic Monitor > SA Traffic
Report to enter the SA Traffic Report page.
2. Set query type and query condition, and then click Query to query the latest data of SA traffic.
3. Click the View Details icon to view details of SA traffic.
4. Set Time Range and click OK.
5. Select a display mode:
•
Click Table to display traffic data in table.
•
Click Line Chart to display traffic data in line chart.
•
Click Bar Chart to display traffic data in bar chart.
•
Click Sampling Point to display sampling point of the line chart. Click again, and the
sampling point will be canceled.
Precautions
•
The lifetime of performance data is a year.
•
he system collects performance data from the instances at a fixed interval (five minutes). When
there are a number of instances, the volume of raw performance data may become considerable
after long-term operation. To avoid impact of excessive raw data to system performance, the
system saves the data based on the following rules:
◦ When the start time is within 1 day (including within latest 1 hour), a five minute's report
(the raw performance data) is generated. The lifetime of raw data is 1 week.
◦ When the start time is within 7 days, a 1 hour's report is generated. The data is collected
every 1 hour. The lifetime of performance data is 1 month.
◦ When the start time is within 1 month, a 1 day's report is generated. The data is collected
every 1 day. The lifetime of performance data is 1 year.
◦ When the start time is within 1 year, a 1 day's report is generated. The data is collected
every 1 day. The lifetime of performance data is 1 year.
◦ The characters "--" indicate that no performance data is collected.
◦ If there are sampling points but no data on the chart, it indicates that the sampled data
is 0; if there are neither sampling points nor data on the chart, it indicates that no valid
data is sampled.
◦ It display sampling point of the line chart when you click Sampling Point in line chart.
96 MPLS Manager