HP Intelligent Management Center Licenses - Manual (Page 80)

Verification
•
The added non-managed CE is listed in the CE device list, and the status is Unmanaged.
Precautions
•
In MVM, you need to configure interfaces for non-managed CEs.
•
If the interface IP address of a non-managed CE is null, the connectivity of the non-managed
CE is audited through the status of the PE interface that connects with the non-managed CE.
•
Non-managed VMCEs can be automatically associated to the VMCE attribute of the links
during auto discovery.
Remove CE
You can remove the existing CEs, including manageable and non-managed CEs and VMCEs from
MVM. After a device is removed, its related information is deleted from MVM completely.
Operation procedure
Approach 1:
1. Click the Service tab, click MPLS VPN Manager, and then click VPN DevicesCE Device List in
the navigation tree.
2. Select one or more CEs on the configuration page.
3. Click Remove.
Approach 2:
•
The removed CE is not in the CE device list.
•
The removed CE is deleted from the global topology and from the VPN topology where the
CE belongs.
1. Open global topology or the VPN access topology.
2. Select a CE.
3. and select Remove from VPN.
Precautions
•
Removing a CE from MVM does not remove the CE from the platform, while removing a CE
from the platform will also remove the CE from MVM.
•
After a CE is removed, all the links connected to it are removed, including the links in the
global topology and VPN topology
Modify non-managed CE
You can modify the device name, interface description, IP address, and mask of a non-managed
CE through MVM.
Operation procedure
1. Click the Service tab, click MPLS VPN Manager, and then click VPN DevicesCE Device List in
the navigation tree.
2. Click the link of the non-managed CE to be modified, or enter the View Non-Managed CE
page by clicking the name of the non-managed CE and then click the Edit link on the page.
3. On the Modify Non-Managed CE page, you can modify the device name, or add or remove
interfaces. Click OK.
80 MPLS Manager