Configure device rsvp hello extension information, Interface features, Query interface rsvp te information – HP Intelligent Management Center Licenses User Manual
Page 114: Configure/modify interface rsvp te attributes, Mpls te tunnel management, Query tunnel information
Operation procedure
1.
Select the Service tab, and then select RSVP TE Advanced Features > Device Features from the
navigation tree to enter the device features page.
2.
Click the Edit icon of a record to enter the RSVP configuration page of the device.
3.
Configure the parameters.
4.
Click OK.
Configure device RSVP HELLO extension information
The RSVP Hello extension is used to test the reachability of RSVP neighbor nodes. This function
helps you configure the RSVP Hello extension information for a device.
Operation procedure
1.
Select the Service tab, and then select RSVP TE Advanced FeaturesDevice Features from the
navigation tree to enter the device features page.
2.
In the device features list, click the
icon of a device to enter the RSVP Hello extension
information configuration page of the device.
3.
Configure the parameters.
4.
Click OK.
Interface features
This function is used to query the RSVP TE information of an interface.
Query interface RSVP TE information
This function is used to query the RSVP TE information of an interface.
Operation procedure
1.
Select the Service tab, and then select RSVP TE FeaturesInterface Features from the navigation
tree to enter the interface features list page.
2.
Type the query values.
3.
Click Query.
Precautions
•
The interface you want to query must be an MPLS TE enabled interface.
Configure/modify interface RSVP TE attributes
This function is used to configure interface RSVP TE feature.
Operation Procedure
1.
Select the Service tab, and then select RSVP TE FeaturesInterface Features from the navigation
tree to enter the interface features list page.
2.
Select the interface you want to configure.
3.
Click the Configure button to enter the interface RSVP TE attributes configuration page.
4.
Configure the parameters.
5.
Click OK.
MPLS TE tunnel management
This function allows you to query, add, modify, and delete tunnels, and display the protection
information and topology information of a tunnel.
Query tunnel information
This function is used to query information about MPLS TE tunnels.
114
MPLS TE manager