Import devices, Synchronize devices, Delete devices – HP Intelligent Management Center Licenses User Manual
Page 110: Import devices synchronize devices delete devices
Operation Procedure
1.
Select the Service tab, and then select Resource ManagementDevice Management from the
navigation tree to enter the device management page.
2.
Type the query values.
3.
Click Query.
Import devices
This function allows you to import one or more devices. Note that you cannot import a device
repeatedly.
Operation Procedure
1.
Select the Service tab, and then select Resource ManagementDevice Management from the
navigation tree to enter the device management page.
2.
Click Import Device to enter the Import Device page.
3.
Click the Select Device button. On the pop-up page, select the devices to be imported and
click OK to return to the Import Device page.
4.
Click OK to enter the import result page.
5.
On the import result page, you can perform the following operations:
•
Click Result to return to the device management page to view the imported devices.
•
Click Import Device to return to the Import Device page to proceed importing devices.
Precautions
•
To ensure that a device can be imported to the MPLS TE system properly, perform the following
operations on the device:
◦
Configure the loopback address and the LSR-ID IP address.
◦
Configure a static route or an IGP protocol (such as OSPF) to make sure that the device
is reachable on the network and the LSR-ID of the device is advertised to the network
through the routing protocol.
Synchronize devices
This function is used to synchronize the MPLS TE device information, that is, delete the configuration
that does not exist on the device from the MPLS TE manager system and update the configuration
of the device in the MPLS TE manager system, making the configuration of a device recorded in
the MPLS TE manager system consistent with the configuration on the device.
Operation Procedure
1.
Select the Service tab, and then select Resource ManagementDevice Management from the
navigation tree to enter the device management page.
2.
Select the device to be synchronized, and click Synchronize.
Delete devices
This function is used to delete one or more devices from the MPLS TE manager system.
Operation Procedure
1.
Select the Service tab, and then select Resource ManagementDevice Management from the
navigation tree to enter the device management page.
2.
Select the device(s) you want to delete and click Delete.
3.
Click OK on the pop-up confirmation dialog box.
110
MPLS TE manager