HP Intelligent Management Center Licenses - Manual (Page 15)

a. On the local PE configuration page, click the Select button behind the UNI Interface text
box. On the pop-up page, select the PE interface connecting CE 1.
b. Type the service instance and encapsulation VLAN for the UNI interface, and select the
encapsulation type.
c. Click the Select button behind the CE Device text box. On the pop-up page, select a CE
device (CE 1).
d. Click Next to enter the remote PE configuration page.
6. Configure the remote PE (PE2).
a.
On the remote PE configuration page, click the Select button behind the UNI Interface
text box. On the pop-up page, select the PE interface connecting CE 2.
b. Select an encapsulation type for the UNI interface.
c. Click the Select button behind the CE Device text box. On the pop-up page, select a CE
device (CE 2).
d. Click Next to enter the configuration summary page.
7. View configuration summary.
a.
On the configuration summary page, to immediately deploy the configuration commands
to the devices, click Deploy Immediately.
b. Click OK to enter the deployment task list page.
8. View the topology.
a.
Select VPN Resources > VPN List in the navigation tree.
b. Click the VPN Topology icon of VPN1 to view the topology information of the VPN.
Precautions
On the configuration summary page, you can configure to deploy the configuration to the devices
immediately. Otherwise, the links will appear only on the topology diagram, with the status being
Undeployed.
PBB Instance Configuration
Application scenario
Company H locates in city B and uses PE 1 and CE 1; company Z locates in city N and uses PE
2 and CE 2. PE 1 and PE 2 are enabled with L2VPN. The two companies are going to undertake
corporate restructuring through merge into a new group for the need of business development and
strategic planning. The new group decides to establish a VPN through PBB to implement network
connectivity, so that information and data can be transferred within the group fast and correctly.
Scenario analysis
Create a PBB VPN by using the L2VPN manager, and then add all network devices in city B and
city N of the group company into the VPN for management.
Operation procedure
1. Add devices to the platform.
Typical Applications 15