HP Intelligent Management Center Licenses - Manual (Page 58)

a. Click VPN Resources > VPN Management in the navigation tree and click Add.
b. Type the VPN name VPN(50:50.50:50) on the Add VPN page, and the system defaults
to selecting periodic audit. Click OK.
c. In the VPN list, click VPN(50:50.50:50) to enter the page of the basic information of the
VPN.
d. Under SC List, click Add to add an SC.
e. On the Add SC page, type the SC name SC(50:50.50:50), select Full-Mesh from the SC
Networking Type drop-down list, and type the Hub RT 50:50. Then click OK
5. Auto discover VPN.
a.
Click MPLS VPN Manager > Auto Discovery in the navigation tree.
b. Click Select PE Device and then select PE 1 through PE 4, which can be queried by device
name, IP address, device status and device category.
c. Click Auto Discovery.
6. Add link.
a.
Select the VPN VPN(50:50.50:50) to add a link to, and click Next.
b. Select PE 1 and its interface Eth 1/0, and click the Modify icon.
c. Select the device CE 1 connected with PE 1, the interface Eth 4/0/1, and click OK.
d. Perform the same operations for add of links on PE 2, PE 3 and PE 4.
e. Click OK.
7. Query topology.
a.
Click VPN Resources > VPN Management in the navigation tree and select the newly
discovered VPN VPN(50:50.50:50) to query its access topology and service topology.
8. Set connectivity audit parameters.
a.
If you select the default settings, start from step 9.
b. Click VPN Resources > VPN Management in the navigation tree to enter VPN list page,
and then select VPN(50:50,50:50) and click the Modify icon.
c. Select audit period, whether to audit inter-spoke non-connectivity and whether to perform
audit on the page for modifying VPN.
d. Click OK.
9. Audit VPN connectivity.
a.
Return to the VPN List page, select VPN(50:50,50:50), and click Audit.
b. Or, enter the VPN Audit Details page, select the link on which to perform connectivity
audit, and click Audit.
10. Query audit results.
a.
Click the Audit Result link corresponding to VPN(50:50,50:50) to enter the VPN Audit
Details page.
b. Query inter-CE connectivity. You can select whether to query normal links.
c. Click the Audit Status link corresponding to the CE-CE link, you can query connectivity
audit details of the link.
Deploy hub-spoke VPN
Scenario description
A company adopts MPLS VPN technology to construct internal network and hopes to connect the
headquarter and three branches through a VPN network. Considering information security, the
headquarter expects that the three branches cannot communicate with one another, but can
communicate with the headquarter.
58 MPLS Manager