HP Intelligent Management Center Licenses - Manual (Page 64)

Parameters
•
SC Networking Type: SC networking falls into two types Hub-Spoke and Full-Mesh based on
the RT value.
•
Hub's Import RT: Represented in two formats.
16-bit AS number:32-bit user-defined number. For example, 101:3. The two numbers are
in the range of [0, 65535] and [0, 4294967295] respectively, but cannot be 0
simultaneously, namely 0:0. ◦
◦ 32-bit IP address:16-bit user-defined number, such as 192.168.122.15:1. The two
numbers are in the range of [0.0.0.0, 255.255.255.255] and [0, 65535] respectively,
but cannot be 0 simultaneously, namely 0.0.0.0:0.
•
Hub's Export RT: Represented in two formats.
16-bit AS number:32-bit user-defined number. For example, 101:3. ◦
◦ 32-bit IP address:16-bit user-defined number, such as 192.168.122.15:1.
Remove SC
Remove one or more SCs in a VPN.
Operation procedure
1. Click the Service tab, click MPLS VPN Manager, and then click VPN ResourcesVPN Management
from the navigation tree.
2. Click a VPN Name in the BGP/MPLS VPN List to enter the VPN details page.
3. In the SC List on the VPN details page, select the SCs to be removed, click Remove. The selected
SCs will be removed after confirmation.
Precautions
Removing an SC will remove the links belonging to the SC.
Modify SC
Modify the basic information of a SC in a VPN.
Operation procedure
1. Click the Service tab, click MPLS VPN Manager, and then click VPN ResourcesVPN Management
from the navigation tree.
2. Click a VPN Name in the BGP/MPLS VPN List to enter the VPN details page.
3. Click the Modify link of the SC to be modified in the SC list on the VPN details page.
VPN management
In MVM, you can view alarms, monitor, and deploy VPNs that contain SCs.
MVM provides two views for you to view VPN information, and you can switch between them as
needed.
•
VPN Details—Lists the VPN basic information, SC list, PE list, CE list, VPN performance
information, service topology link and the latest ten unacknowledged alarms in the VPN in
tables. The VPN status corresponds to the highest level of the alarms generated on the PE and
CE devices. The status of each VPN is displayed in the Status column of BGP MPLS VPN List.
The VPN status can be unmanaged, unknown, warning, normal, minor, major, and critical.
•
Access topology—Displays the connection relationship between PE and CE.
•
Service topology—Displays the connection relationship and the connectivity between CEs in
topology.
64 MPLS Manager