ADC Release 3.1 - Manual (Page 60)

ADCP-70-220 • Issue 1 • November 2000 • Section 2 Operation and Maintenance
Page 2-30
© 2000, ADC Telecommunications, Inc.
NTP-014
Page 2 of 2
B. Adding Services
3.2 Slots within a shelf may have cards equipped but not in-service,
or un-provisioned ports available on a card that is already in-
service. This allows the administrator to assign bandwidth,
ports, or connections on the network to customers as needs
demand. When adding additional services, ports, etc., refer to:
NTP-009
3.3 When establishing new ATM VP/VC connections to in-service
cards and ports, refer to:
NTP-013
3.4 When upgrading software releases or ring interfaces, refer to: NTP-016
4. HELP LINE
4.1 For assistance in retrieving reports, troubleshooting alarms,
warranty information, etc., the ADC Help Line is provided
through the Cellworx Vision GUI software. To access this
information, refer to:
DLP-735