ADC Release 3.1 - Manual (Page 12)

1152700 • Issue 1 • February 2001 • Preface
Page x
© 2000, ADC Telecommunications, Inc.
FCC COMPLIANCE STATEMENT
Class A
The Cellworx STN System complies with the requirements for class A digital device per Part
15 of the FCC Rules.
Warning: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
DOC Compliance
This equipment does not exceed Class A limits for radio emission for digital apparatus, set out
in the radio interference regulation of the authorization methods of Industry Canada.
Operation in a residential area may cause unacceptable interference to TV and radio reception
requiring the owner or operator to take whatever steps are necessary to correct the
interference.
FDA Compliance
This product uses a Class 1 LASER according to FDA Rules. This product conforms to all
applicable standards of 21 CFR 1040.
Safety Compliance
UL listed for use in the U.S. and Canada.
IEC 950 (1991) Second Edition with Amdts. No. 1 (1992), 2 (1993), 3 (1995), and 4 (1996)
EN60950 (1992) with Amdts. No. 1 (1993), 2 (1993), 3 (1995, 4 (1997), and No.11 (1997); and
with National Differences as specified in the CB Test Report 99RT07840-121698.
The Cellworx STN system complies with EN 55022:1995, IEC 801-2:1991, IEC 801-3:1984
and draft IEC 801-3-1990, and IEC 801-4:1988.
The Cellworx STN system complies to all the applicable EC directives of the European Union
and is CE marked.
NEBS Compliance
The Cellworx STN system is fully NEBS compliant.