ADC Release 3.1 - Manual (Page 422)

1152700 • Issue 1 • February 2001 • Operation and Maintenance
Page 2-402
© 2000, ADC Telecommunications, Inc.
DLP-790
Page 11 of 14
Cellworx Vision: Traffic Contract Configuration X
Traffic Contract Name:
Existing Traffic Contract:
Refresh Close
Traffic Contract Type
********
ATM Constant Bit Rate (CBR), QoS Class I
ATM Variable Bit Rate (VBR), QoS Class II
ATM Unspecified Bit Rate (UBR), QoS Class Unspecified
FR, QoS Class II
Peak Cell Rate (PCR):
Cell Loss Priority (CLP) = 0 +1
Sustainable Cell Rate (SCR) :
CLP=0 CLP= 0 + 1
Tagging
Maximum Burst Size (MBS) Cells:
Apply
64
TYPE IN A NAME FOR
TRAFFIC CONTRACT
OR
SELECT FROM EXISTING
TRAFFIC CONTRACTS
DISPLAYED HERE.
SELECT THE SERVICE
CLASS TYPE OR VERIFY
ENABLED OPTION.
ENTER THE PCR FOR ATM
CBR QOS CLASS 1, AND
ATM VBR QOS CLASS II.
SELECT OPTIONS TO
DETERMINE SERVICE
CLASS TYPE FOR VBR
CONNECTIONS (VBR.1,
VBR.2, OR VBR.3).
Rate Unit Kbps
Delete
SELECT KBPS OR CELLS
CBR=1.5 MB
APPLIES CHANGES
AND CREATES NEW
TRAFFIC CONTRACT. DELETES SELECTED
TRAFFIC CONTRACT. CLOSES TRAFFIC
CONTRACT SCREEN. REFRESHES DATA
AFTER SELECTIONS
HAVE BEEN APPLIED.
Cell Delay Variation Tolerance (CDVT) microseconds:
Note: Selecting 0 for CDVT will cause the board default
to be chosen. Default values are:
DS1/E1 = 4150 DS34 = 1550 OC3 = 1400 OC12 = 350
Real Time
0
0026-002
Figure 790-8. Create a Traffic Contract
Cellworx Vision Subnetwork Management System
File Configuration Fault Performance
Software
NMIC Platform
Topology
Time and Date
Create...
View Fiber Bandwidth Usage ...
View Ring Resource Usage ...
Configure Service Provider Profile ...
Configure Traffic Contract ...
View ...
Connection
10963-D
Figure 790-9. GUI Connection Menu Tree