ADC Release 3.1 - Manual (Page 437)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-417
© 2000, ADC Telecommunications, Inc.
DLP-793
Page 1 of 3
RETRIEVE T3 CES CARD STATUS
Summary: This procedure defines the information retrieved from the shelf level GUI display for
the T3 CES card status. User must have the GUI launched and accessed the shelf level GUI
display per NTP-007 prior to performing this procedure.
1. Double click on the T3 CES card located in the shelf level GUI “Chassis View” at the top
of the window.
2. Click the small block between the Status and Configuration sections and drag it downward
to view all the status information. Refer to Table 793-1 for definitions of status information
provided.
3. Select each port on the card to view the statuses.
4. Select the Close button at the bottom of the window to return to the chassis level display.
Stop! You have completed this procedure.
Cellworx Vision: Card View - T3 Cell Emulation Service
Status:
Apply Chassis View Refresh Close
X
Card Level
Operational State:
Availability State:
Protection State:
Port Level
NE Name: Cellworx1
NE Id: 1
Card: T3 CES
Slot Number: 8
Port Number: 1
Status
Active
1
2
3
Port
ADC
T3
CES
Up
Availabli
Not Protected
DS3 Line State:
No Alarm
Configuration:
Port Level
Xmit AIS
LOS
Loopback State
Other Failure
APPLIES CHANGES
AND SENDS TO SHELF
CONTROLLER. RETURNS TO CHASSIS
VIEW WITHOUT CLOSING
CARD LEVEL VIEW. REPAINTS WINDOW
TO REFLECT ANY
CHANGES. CLOSES CARD LEVEL
VIEW AND RETURNS TO
SHELF LEVEL VIEW.
CLICK ON BOX AND DRAG
UP OR DOWN TO EXPAND
STATUS OR CONFIGURATION
VIEWS.
Card Level
Administrative State: Congestion Thresholds:
Locked
Unlocked
Ingress:
Egress:
80
80
%
%
Ring Selection:
Auto Ring 16 Ring 17
CARD LEVEL STATUS.
INDICATIONS.
PORT LEVEL STATUS.
INDICATIONS.
0026-008
Figure 793-1. T3 CES Card Status Window