ADC Ethernet Distribution Frame TrueNet - Manual

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Sp
ec
S
h
ee
t
TrueNet ®
Category 5e Specialty Patch Cords
Impedance matched for use in TrueNet® structured cabling systems; these specialty patch cords
exceed all performance requirements for Category 5e. The plug is designed with integrated strain
relievers that prevent the cable from moving at the termination point when the cable is flexed,
safeguarding circuit integrity and guaranteeing maximum performance. The strain relievers also
ensure that proper bend radii are maintained throughout the network. These cords are available
in plenum or riser versions to meet all requirements within the LAN and Data Center environment.
The specialty cable assemblies are available in plug to plug or jack to plug configuration for ease of
installation in a data center or a zone cabling application.
Features:
• Exceeds TIA/EIA Category 5e requirements
• Cable assemblies are available in riser or plenum solid horizontal cable versions
• Durable design to be in operation beyond 20-year product warranty
• Impedance matched patch cord for maximum throughput
• Flexible strain relief boot maintains proper bend radius to ensure peak performance
• Plug to jack cable assemblies utilizes ADC’s K610 5e jack and LSA-PLUS 45 degree angle IDC design
• Up to 28 percent smaller outer diameter than other patch cords
• UL 1863 listed and Category 5e performance verified