ADC Release 3.1 - Manual (Page 151)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-131

2000, ADC Telecommunications, Inc.
DLP-722
Page 2 of 3
c) The ‘config’ directory should be handled with discretion. All files under this
directory distinguish active vs. standby NMICs except for the database files.
Under steady state operating conditions, the database files on both NMICs
will be identical. These files should not be modified when the NMICs are
operationally “UP”.
The database files under config directory are; NE.*, and NMIC. The *
indicates the NE number or identifier. These files are normally handled by the
application automatically.
4. Once all files have been selected, select the OK button at the bottom of the window.
Selected files are then copied onto the standby NMIC card.
5. The informational message shown in Figure 722-3 appears stating the action being taken.
Select OK.
Stop! You have completed this procedure.
Cellworx Vision Subnetwork Management System
File Configuration Fault Performance
Topology
Time and Date
Connection
Administration
File Replication
Software
NMIC Platform
10970-D
Figure 722-1. Cellworx Vision NMIC Platform Menu Tree