ADC Release 3.1 User Manual
Page 182

1152700
•
Issue 1
•
February 2001
•
Section 2 Operation and Maintenance
Page 2-162
2000, ADC Telecommunications, Inc.
DLP-730
Page 4 of 4
Table 730-1. NDC Data Statistics
STATISTIC
DEFINITION
Connection Name
User assigned.
NE ID
ID number assigned to the NE where the connection
originates. ID is set via a thumbwheel switch on the SC
EIM at the rear of the shelf.
Card Type
Shows the type of card (i.e., T3 CRS, T1 Multi 1, etc.)
Resource
Identifies the slot and port number of the card where
the connection originates.
Crct Type
Defines the type of circuit (i.e., CES, CRS)
Interval
Shows time interval as the fifteen minute block selected
by user (i.e., 01:15 – 01:30) or as current.
VPI
Shows the Virtual Path Identifier assigned to the
connection by user.
VCI
Shows the Virtual Channel Identifier assigned to the
connection by user.
Suspect
Shows a count of cells that are suspect of having errors
or having been reset.
Supp
Shows a count of cells that have been suppressed
Disc
Shows a count of cells that have been discarded.
DISC (CLP=0)
Shows a count of cells with a Cell Loss Priority of 0
that have been discarded due to congestion on the
network.
Passed
Shows a count of cells that have passed.
Ingress
Shows a count of cells that have entered the port on this
connection.
Ingress (CLP=0)
Shows a count of cells with a Cell Loss Priority of 0
that have entered the port on this connection.
Egress
Shows a count of cells that have exited the port on this
connection.
Egress (CLP=0)
Shows a count of cells with a Cell Loss Priority of 0
that have exited the port on this connection.