ADC Release 3.1 - Manual (Page 135)

1152700 • Issue 1 • February 2001 • Section 2 Operation and Maintenance
Page 2-115

2000, ADC Telecommunications, Inc.
DLP-715
Page 1 of 2
VIEW RING RESOURCE USAGE
Summary: This procedure details the steps required to successfully utilize the NMIC GUI
software to view the used bandwidth on a network. This procedure can be used to check for
available bandwidth when assigning new connections. This procedure assumes the administrator
has successfully accessed and launched the NMIC GUI software per NTP-015.
1. Using the left mouse button, select Configuration, Connection, and View Ring Resource
Usage, (or using the direct selection keys, Alt+C, Alt+N, then Alt+R). Refer to
Figure
715-1 .
2. The Cellworx Vision Ring Resource Usage window appears. Refer to Figure 715-2 . The
information displayed lists a total of all VPIs assigned on the ring, if they are allocated as
user or management connections, and the amount of VPIs left that may be assigned to the
ring. Also listed is the amount of bandwidth allocated to user or management
connections.
3. Select Close to return to the Cellworx Vision network display.
Stop! You have completed this procedure.
Cellworx Vision Subnetwork Management System
File Configuration Fault Performance
Software
NMIC Platform
Topology
Time and Date
Create...
View Fiber Bandwidth Usage ...
View Ring Resource Usage ...
Configure Service Provider Profile ...
Configure Traffic Contract ...
View ...
Connection
10964-D
Figure 715-1. Cellworx Vision View Ring Resource Usage Pull Down Menu