NORD Drivesystems BU0700 - Manual (Page 62)

NORDAC SK 700E Operating Manual
62 Subject to technical alterations BU 0700 GB-1411
Availability of the parameters
Different parameters can be seen and edited when specific customer units and special extension units are used. The following
tables (Chap. 5.1...) list all parameters with information regarding which option they are visible with.
e
x
a
m
p
le
Parameter Setting value / Description / Note Available with option
P000 (P) Operating display BSC STD MLT BUS POS ENC
Only with the Option ControlBox according to selection in P001.
The operating parameter selected in P001 will be displayed here.
BSC = Basic I/O
POS = Positioning module
STD = Standard I/O
MLT = Multi I/O or Multi I/O 20mA
BUS = Bus customer units
ENC = Incremental encoder module
Parameter number
Parameter text
Parameter dependent on parameter set