Getriebebau nord, 7 additional information – NORD Drivesystems BU0700 User Manual
Page 126
NORDAC SK 700E Operating Manual
126
Subject to technical alterations
BU 0700 GB-1411
8.6.2 Repair notes
If you contact our technical support, please have the precise device type (rating plate/display), accessories and/or options, the
software version used (P707) and the series number (rating plate) at hand.
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstraße 37
26605 Aurich, Germany
For queries about repairs, please contact:
Getriebebau NORD
GmbH & Co.
Phone: 04532 / 401-515
Fax: 04532 / 401-555
If a frequency inverter is sent in for repair, no liability can be accepted for any added components, e.g. such as mains cables,
potentiometer, external displays, etc.!
Note: Please remove all non-original parts from the frequency inverter.
NOTE
If possible, the reason for returning the component/device should be stated. If necessary, at least
one contact should be stated in case of queries.
This is important in order to keep repair times as short and efficient as possible.
On request you can also obtain a suitable return good voucher from Getriebebau NORD.
Unless otherwise agreed, the device is reset to the factory settings after inspection or repair.
8.7 Additional information
You can also find the comprehensive manual in German, English and French on our Internet site.
You can also obtain this manual from your local representative if necessary.