NORD Drivesystems BU0700 - Manual (Page 103)

5.2 Parameter overview, User settings
BU 0700 GB-1411 Subject to technical alterations 103
5.2 Parameter overview, User settings
(P)

Parameter set-dependent, these parameters can be differently adjusted in 4 parameter sets.
Parameter
No.
Name
Factory
setting
Setting after commissioning
P 1 P 2 P 3 P 4
OPERATING DISPLAYS (5.1.1)
P000 Operating display
P001 Select of displayed value 0
P002 Display factor 1.00
BASIC PARAMETERS (5.1.2)
P100 Parameter set 0
P101 Copy parameter set 0
P102 (P) Acceleration time [s] 2.0/ 3.0/ 5.0
P103 (P) Deceleration time [s] 2.0/ 3.0/ 5.0
P104 (P) Minimum frequency [Hz] 0.0
P105 (P) Maximum frequency [Hz] 50.0
P106 (P) Ramp smoothing [%] 0
P107 (P) Brake reaction time [s] 0.00
P108 (P) Disconnection mode 1
P109 (P) DC brake current [%] 100
P110 (P) Time DC-brake on 2.0
P111 (P) P factor torque limit [%] 100
P112 (P) Torque current limit [%] 401 (OFF)
P113 (P) Jog frequency [Hz] 0.0
P114 (P) Brake delay off [s] 0.00
MOTOR DATA / CHARACTERISTIC CURVE PARAMETERS (5.1.3)
P200 (P) Motor list 0
P201 (P) Nominal frequency [Hz] 50.0 *
P202 (P) Nominal speed [rpm] 1385 *
P203 (P) Nominal current [A] 3.60 *
P204 (P) Nominal voltage [V] 400 *
P205 (P) Nominal power [W] 1.50 *
P206 (P) Cos phi 0.80 *
P207 (P) Star Delta connection 0 *
P208 (P) Stator resistance [

] 4.37*
P209 (P) No load current [A] 2.1 *
P210 (P) Static boost [%] 100
P211 (P) Dynamic boost [%] 100
P212 (P) Slip compensation [%] 100
P213 (P) ISD control loop gain [%] 100
P214 (P) Torque precontrol [%] 0
P215 (P) Boost precontrol [%] 0
P216 (P) Time boost precontrol [s] 0.0
P217 (P) Oscillation damping [%] 10
P218 Modulation depth [%] 100
*) dependent on inverter power or P200