Dwyer PSX2 - Manual (Page 79)

70
(1) “DAMPING” : when changing output response
Used for attenuating the variation of measured value.
A time constant is set. (Response time of about 63%)
Settable range: 0.0 to 100.0 sec in 0.1 sec steps
63%
Time
Response time
Flow rate
[Operation]
(1) Press the or key on the OUTPUT CONTROL
screen and select “DAMPING”. Then, press the ENT
key, and the cursor moves to the set item, enabling
you to set the response time.
(2) Move the digit by pressing the or key and
enter numeric values by using the or key.
After entry, press the ENT key for setting.
Bulletin F-9-PUX2