Dwyer PSX2 - Manual (Page 127)

118
(2) To check for ultrasonic receiving signal waveform;
(1) Move the cursor to “TRANSIT TIME” on the
MAINTE screen and press the
ENT
key, and the
TRANSIT TIME/SIGNAL CHECK screen is dis-
played.
(2) Move the cursor to “SOURCE” on the TRANSIT
TIME/RECEPT.WAVE screen and press the
ENT
key.
(4) When SOURCE is selected, SIGNAL CHECK dis-
play will be started.
(3) The SOURCE screen appears.
Select the following waveform by the or key
and press the
ENT
key.
• U: WAVE
• D: WAVE
Data axis
Time axis
Bulletin F-9-PUX2