Check part identification & specification (cont'd) – Dwyer PSX2 User Manual

Page 15

Text mode
Original mode

Bulletin F-9-PUX2

Check part identification & specification (cont'd)

Note)
Use a guide rail for applications in which ultrasonic signal penetration is
difficult, for example piping is very old, cast iron pipe, piping with mortar
liners, or high turbidity liquid or flow profile.

Applicable diameter Range:

V Method: 50mm to 250mm (1.97 in. to 9.84 in.) (PSX2-HT)
V Method: 50mm to 300mm (1.97 in. to 11.81 in.) (PSX2-A)
Z Method: 150mm to 400mm (5.91 in. to 15.75 in.)(PSX2-HT, PSX2-A)

Location of
identification
plates

PSX2-A/E

PSX2-B

PSX2-HT

This manual is related to the following products:

PUX2