Bulletin f-9-pux2 – Dwyer PSX2 User Manual
Page 70
61
(13) Changing decimal position
Decimal place can be changed.
Decimal position can be changed on the mea-
surement screen.
• For modifi cation method, move the cursor
by pressing
or
key.
• Move the cursor to the both ends of numeric
by pressing
or
key (
Ż000.000Ź).
• Press the
ENT
key, the decimal position can
be changed. (The ends of cursor color will
thicken up)
• Pressing
or
key, select the changing
position, and then press the
ENT
key.
(14) Switching measurement screens
The measurement value screen can be switched to the measurement graph screen.
Move the cursor to the
and press the
ENT
key.
The screen switches as shown below.
Follow the same steps described above to return to the previous measurement value screen.
ENT
Scale setting can be changed on the measurement graph screen.
Move the cursor to the
and press the
ENT
key.
Select the item by the
or
key and press the
ENT
key to change the setting.
Use the
or
key for entering and press the
ENT
for setting.
Pressing the
ESC
key returns to the original status.
ENT
Changing
decimal
position
Bulletin F-9-PUX2