Dwyer PSX2 User Manual
Page 100
91
(3) “LCD POWER OFF”: when setting time for extinguishing LCD.
[To turn off LCD automatically]
Set the LCD off time (the setting range is from 0 to 30min)
If key operation is not performed, the backlight of the LCD (screen) goes off automatically and
then the power of LCD will be OFF. If key operation is performed while the backlight is kept
off, it comes on.
If 0 min. is selected for OFF time, the light is kept ON.
LCD ON
LCD POWER OFF
2
Key operation
LCD POWER OFF
2
LCD OFF
LCD Power OFF
[Operation]
(1) Press the
or
key on the BASIC SETUP screen
and select “LCD POWER OFF”.
Press the
ENT
key, and you are ready to set the LCD
off time.
(2) Move the digit by the
or
key and enter numeric
values by pressing the
or
key.
After entry, press the
ENT
key.
Bulletin F-9-PUX2