Dwyer PSX2 - Manual (Page 186)

177
16.5.2 Measured data fi le
(1) Confi guration data fi le
A fi le is roughly confi gured of three sections.
• Section [START] A fi le is generated at start, and this section is created at that time.
Item Contents
PRODUCT Product name, fi xed
VERSION File format version number (1.0.0, fi xed)
TIME Logger start date and hour
CYCLE Logger acquisition period (sec)
• Section [DATAx] Added at the time of generation of target data fi le.
Item Contents
FILE File name of logger data
INDEXx Offset (bytes) to (date and hour) data in the logger data is added sequentially
beginning from 1 as indicated below.
(offset, total number of data in offset, date/hour of offset)
TIME Logger data exit date and hour
COUNT Total number of data in target data fi le
STATUS Exit status
NORMAL: Normal exit caused by termination of acquisition period
STOP: Normal exit caused by stop operation during acquisition
POWER OFF: Interruption caused by OFF button during acquisition
BATTERY LOW: Interruption caused by battery capacity drop during acquisi-
tion
FIFO EMPTY: No vacancy in measurement FIFO
ABNORMAL: Stop caused by system error during acquisition
SIZE Byte size of target data fi le
SUM Total number of data up to target data fi le
Bulletin F-9-PUX2