Dwyer PSX2 - Manual (Page 148)

139
(4) Measured data
Measured data is displayed.
Select measured data by the cursor key, and then press the
ENT
key.
Data of the present measuring conditions is displayed.
Power: Displays the intensity of the incoming signal.
Deviation: Displays the standard deviation of the Doppler shift.
Success rate: Displays the success rate of power and deviation.
MAX range: Displays the maximum measurable fl ow rate.
Analyzer measurable range can be changed by pipe usage or the sensor to be used
in the Pulse Doppler method.
When stainless steel is selected as pipe material, nominal wall thickness is Sch20s,
and the fl uid is water, the following chart displays the measurable range in above
condition.
Unit: m/s Unit: m 3 /h
Bulletin F-9-PUX2