Dwyer PSX2 - Manual (Page 138)

129
(2) In order to update the software
Preparation
Prepare an SD memory card containing update fi les.
Create a folder by name “UPDATE” just beneath the root folder of the SD memory card. Save
two update fi les provided from manufacturer just beneath the folder.
Root
(Folder)
UPDATE
(File) FSC_SYSM.bin
FSC_SPDM.bin (File)
Press the
ESC
key on the software screen. A message appears.
(1) If update is not necessary, select “No” using or
keys, and then press the
ESC
key.
• For implementation of update, supply power from an AC power adaptor in the state
where the battery is fully charged.
If power is turned off during update, unit will no longer function.
• Other than analog input and output calibration values are initialized upon implementa-
tion of update. Moreover, the displayed language changes to English. For changing the
displayed language, see “5.2 Turning on the power and language preference”.
CAUTION
(2) If update is necessary, select “Yes” using or
keys, and then press the
ESC
key
Update is executed.
Restart occurs automatically on termination of up-
date.
The length of time required for update is about 30
seconds.
Check the version after restart.
Bulletin F-9-PUX2