Dwyer PSX2 - Manual (Page 36)

27
7.3 Outer diameter of piping
(Range: 13 to 6000 mm / 0.51 to 236 inch)
The “OUTER DIAMETER” is reversed from
white to blue, on the “PROCESS SETTING”
screen
Press the
ENT key, the screen of “OUTER DIAM-
ETER” for selecting the input method of outer
diameter measurement and “PERIMETER” screen
will appear.
Press the
ENT key after the selection to enter the
outer dimension.
Use the or key to cause the digit to move in
the right and left direction
Use the
or key to enter the numeric value.
After entry, press the ENT key.
Note) Enter outer dimensions, not nominal
diameter (example: 20A o 20).
ENT
ENT
ENT
Example) When the outer diameter of piping is 318.5 mm:
ENT ENT
Outer
diameter
Perimeter
Outer diameter of piping Perimeter of piping
Bulletin F-9-PUX2