Dwyer PSX2 - Manual (Page 38)

29
7.5 Wall thickness (range: 0.1 to 100.00mm / 0.004 to 3.9 in.)
Press the key, so the “WALL THICKNESS” is
reversed from white to blue.
Press the
ENT key, Wall thickness can be entered
(See pages 156 to 162, Piping Data ).
Use the
or key to move the digit to the left
and right.
Using the
or key, enter the value. After
entry, press the ENT key.
B : Lining
thickness
B
A : Wall
thickness
A
Lining and wall thickness of piping
If the wall thickness is not known, measure
it by a wall thickness gauge, and enter the
value.
ENT
ENT
ENT
Example) When the wall thickness is 1.25 mm:
Bulletin F-9-PUX2