Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 87)

83
If the capture device has been secured by a user name and password, this page will not
appear until you have supplied the required values to the authentication prompt like
this:
14. Supply the required user name and password then click OK and the Capture page
should appear.
15. To capture a picture from this page using a previously attached and configured camera:
a. Click on the next to the identity that requires a photo.
The connected capture device takes a picture of the designated person and places
it on the Capture page.
b. To create additional pictures, repeat Step a.
c. To view all captured pictures for this person, click on the person's name.
The Identities Edit screen appears.
d. Select the Capture tab to view the Identity Capture page.
e. Click to select the image you want to use for the person.
f. Click to save this image.
16. Click the Photos tab.
The Photos page appears like this example:
17. Click the button.
The screen expands to include two fields like this example:
18. At the 'Photo' text box, either enter a file name complete with path, or click the
button and, using the Choose File dialog box, navigate to the directory and
file containing the image you want to upload.
If you need to remove this dialog box, click the button.
19. Click Open to confirm the choice.
20.If this is the primary photo to be used for this person, click to check the Primary box.