Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 70)

66
The IP Camera Listing page appears like this example.
3. Select one of the currently available device types:
• For an IP-based camera, go to step 4.
• For an Exacq server, click the Exacq tab and the Exacq Servers listing page appears.
• For a Pelco server, click the Pelco tab and the Pelco Server listing page appears.
• For a LifeSafety power supply, click the LifeSafety tab and the LifeSafety power
listing page appears.
• For an Avigilon server, click the Avigilon tab and the Avigilon server listing page
appears.
• For a Salient server, click the Salient tab and the Salient listing page appears.
• For a Milestone server, click the Milestone tab and the Milestone listing page
appears.
4. From the appropriate listing page, click the appropriate add button. For example, at the
IP-Based camera page, you would click .
The appropriate Add page appears like this example:
5. Fill out the fields on the page as required.
This page includes these fields and buttons:
IP-Based Camera
Name
Enter the name of this device. Pick a name that will help
identify the camera.
Type
From the pick list, select the type of image device this is. You
can select from:
Web Camera
- This is a network-attached camera.
RTSP
- The Real Time Streaming Protocol is a network control
protocol designed for use in entertainment and
communications systems.
Device IP
Enter the IP address for this device.
Still URL Enter the URL or web address, if required, of this camera's
web-based application showing the still picture this camera is
currently framing.