Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 69)

65
NOTE:
None of the values entered here are reflected on the canvas until you have saved the
screen by clicking . The Preview pane appears with the new data field reflected.
Badge Camera Configuration
The Access Control Manager enables the qualified operator to capture photos from a networked
camera. Most cameras are supported by this application as long as the output of the device is
digital and supports the jpg image format.
NOTE:
Before the Access Control Manager can use the device, it must first be connected to a
LAN that is accessible to the Access Control Manager appliance.
To connect and configure a camera for capturing photos:
1. Using the instructions for your network-compatible camera, connect the camera to the
network and configure it.
2. At the User Links section of the home page, click the My Account link.
The My Account Profile page appears like this example:
3. At the 'Badge Camera' field, select from the drop-down list the device you plan to use to
capture pictures.
Only those devices previously defined for this system appear in this drop-down list.
4. When you're finished, click .
The selected camera is now the default capture device.
To further define the use of this camera within the Access Control Manager environment:
1. At the Setup links section of the home page, mouse-over Settings.
A pull-down option list appears.
2. From the available sub-options, select External Systems.
Maintain
Aspect
Click to check this box designating that resizing this graphic will not change the
aspect ratio of the image. Using this feature you can avoid distorting the image.
Select the camera to use