Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 71)

67
Preview URL
Enter the URL or web address, if required, of this camera's
web-based application showing a preview of the finished
picture.
Device Login Enter the login name that will enable access to this device.
Many cameras accessed over the network require security to
use. The Access Control Manager's device login is supplied by
default.
Device Password Enter the password that will enable access to this device.
Many cameras accessed over the network require security to
use. The Access Control Manager's device password is
supplied by default.
Exacq Server
Appliance From the drop-down list, select the appliance to which this
server is connected or with which it is configured. Only those
servers previously defined for this system can appear in this
list.
Address Enter the URL or IP address of this server. All servers have a
fixed address that must be entered here.
Port
Enter the appliance port to which this server is connected.
Username
If required, enter the user name used to access this server.
This user name is automatically entered whenever the server
is accessed.
Password
If required, enter the password used to access this server. This
password is automatically entered whenever the server is
accessed.
Motion Smoothing From the drop-down list, enter the interval in seconds the
appliance uses to judge aberrations in the motion of the video.
This eliminates expected motion in the video, like a flickering
panel or background motion, and concentrates on that motion
which is unexpected and therefore suspicious.
Pass Through
Enabled
Check this box to indicate that pass through is enabled for the
input connected to this server.
Installed Check this box to indicate that this server is installed and
communicating properly with the Access Control Manager
appliance.
Pelco Server
Name
The existing name of this video server.
Alt Name
The alternative name for this video server.
Appliance From the drop-down list, select the appliance to which this
server is connected or with which it is configured. Only those
servers previously defined for this system can appear in this
list.
Address Enter the URL or IP address of this Pelco server. All Pelco
servers have a fixed address (assigned when this server was
configured) that must be entered here.