Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 19)

15
10. Click on the Host tab and configure the host communication settings.
11. Enter the primary IP address for the panel.
Leave the rest of the settings as default. However, if you need to change any of them,
the fields on this page include:
Partitions
From the window, select one or more partitions to which this
panel will be assigned.
Only those partitions presently defined by this system appear
in this list.
Model This read-only field displays the Panel model to which the sub
panel is connected.
Time zone Identifies which time zone applicable to the panel. Select the
time zone from the drop-down list. Only those time zones
previously defined for this system can appear in this list.
Allocate space for:
Credentials
Defines the amount of credentials that can be in the
panel. Enter a number between 0 and 100,000 where the
default value is 10,000.
The more credentials you designate, the less room there will
be for events.
Events
Defines how many events to buffer in the panel. Enter a
number between 0 and 5,000 where the default value is
5,000.
The more events you designate, the less room there will be for
credentials.
DB Version
This read-only field indicates the version of the Access Control
Manager database currently used by this panel.
Name
Identities the name of the present panel.
Appliance Read-only field that Identities the name of the selected
appliance.
Installed Check this box to indicate that the panel is currently running
and the application can begin to poll it.