Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 14)

10
The Software Terms and Conditions form appears like this example:
15. Review the terms then enter the name of this company, the name of the administrator
or owner, and the title of the person whose name appears here, then click Back.
16. Reboot the appliance as explained in Step 10, then click Logout at the top of the page
to log out of the appliance.
17. Log in and click on Appliance.
The Appliance property sheet appears.
18. Click on the Ports tab.
The Ports page appears like this example:
19. Click on the Port-1 name.
The Port-1 edit page appears like this example:
20.At the ‘IP Address’ field, enter the selected static IP address.
This IP address should be in the range of your LAN. If needed, consult your IT
administrator for an appropriate address.