Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 113)

109
Monitoring Hardware Status
When you click the HW Status tab from the Monitor screen, a page like this example appears:
This page displays the current status of all connected panels, doors, inputs, outputs and
associated security devices. A qualified operator can also use this screen to control certain
aspects of installed readers.
These fields and buttons are defined below:
Appliance name Displays the time this Access Control Manager appliance has been running.
Timestamp Displays the date and time when the appliance initially went online.
Up Displays the time this Access Control Manager server has been running.
RAM Displays the number of megabytes (MB) the Access Control Manager server currently
possesses.
Flash Displays the MB of flash memory the Access Control Manager appliance currently contains.
Disk Indicates the total number of MB the Access Control Manager server hard driver contains.
Load Indicates the current compute load the Access Control Manager server is experiencing.
Port Indicates the ports the server is currently using to connect to the Access Control Manager.
Eight ports are displayed.
Link Indicates the current state of the link supported by the indicated port. This is either Normal
or None.