Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 46)

42
5. When you're finished, click .
The Card Formats Listing page reappears with the new card format displayed.
Offset
The offset number for this code.
Max Digits The maximum number of digits this card format can possess.
Min Digits
The minimum number of digits this card format can possess. ABA
Mag only.
Even Parity
Length The even parity length of the number on this card format.
Wiegand only.
Event Parity
Location The location in the number string where the even parity bits
reside. Wiegand only.
Odd Parity Length The length of the odd parity bits on this card format. Wiegand
only.
Odd Parity
Location
The location in the number string where the odd parity bits reside.
Wiegand only.
Facility Code
Length
The length of the facility code in digits.
Facility Code
Location The location in the number string where the facility code resides.
Card Number
Length The total length of the card number on this card.
Card Number
Location
The location of the card number in the number string.
Issue Level Length
The length of the issue level number in the number string.
Issue Level
Location The location of the issue level number in the number string.
Step parity by 2 Check this box to indicate that the parity must be stepped by 2.
Wiegand only.
Suppress facility
check
Check this box to ignore a facility check. This operation will not be
performed.
Corporate card
mode
Check this box to enable use of the corporate card format.
Enable 37 bit
parity w/4 Check this box to enable 37-bit parity by 4. Wiegand only.
Enable 37 bit
parity w/2 Check this box to enable 37-bit parity by 2. Wiegand only.
Enable 75 bit
transparent mode
Check this box to enable 78-bit transparent mode. Wiegand only.
Reverse card
format
Check this box to enable reverse card format. Wiegand only.