Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 11)

7
Host Name
This is the DNS name for this appliance and is identified as
such under the 'DNS Name' field on the Appliance Listing
page.
Domain Name Enter the domain name where this appliance resides.
Name Server Enter the name of the domain server.
Time Server
Enter the time server connected to this appliance.
Time zone From the drop-down pick list, specify the time zone where this
appliance resides.
Use Daylight Savings
Time Check this box to indicate that this appliance uses Daylight
Savings Time, when appropriate.
Enable Remote TCP/
IP Management
Check this box to indicate that this appliance can use remote
TCP/IP management. By default this feature is checked and
enabled, since the configuration or operator often needs to
access this appliance via the internet.
Enable SNMP
Click this box to enable SNMP functionality for this appliance.
SNMP Version
From the pick list, select the version of SNMP being used for
this appliance.
SNMP Contact Enter the name of a contact that will oversee and collect
SNMP data.
SNMP Location Enter the location where the SNMP server resides.
Splunk URL
Enter the URL where the Splunk application resides, if
appropriate.
Stored Transactions Enter the maximum number of transactions that can be stored
on the appliance.
When the number of transactions exceeds this limit, new
transactions will start overwriting previously stored
transactions.
The default is 1,000,000 transactions.
Hardware Type From the drop-down pick list, select the Access Control
Manager Appliance model. Available options are: Express,
Enterprise
, and Virtual.
Web Server Port Specify the port number that is used to connect the web
server to this appliance.
Service Port Specify the port number that is used to access diagnostics
and service for this appliance.
Edge Listen Port
Specify the port number that accesses the listening feature on
this appliance for HID Edge panel communication.
Ldap Connect Port
Specify the port number that enables communications
between this appliance and other IP network-attached entities
using LDAP information service protocol.
This field is only applicable for LDAP devices.
Transactions Connect
Port Specify the port number used for connecting to the Postgres
transaction database for ODBC connections.