Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 24)

20
These fields include:
5. Click to save these values.
A message appears “Area was successfully created” and the Areas Listing page
reappears with the newly added area on the list.
Appliance From the drop-down pick list, select one of the existing
appliances in which this area appears.
Only those appliances currently defined for this system appear in
this list.
Name Enter the name of this area
Maximum
Occupancy
Enter the maximum number of cardholders allowed in this area at
a specified time.
Log Min Reached
Record a transaction when the minimum count for this area is
reached.
Log Max Reached Record a transaction when the maximum count for this area is
reached.
Enable Area Check this box to enable use of this area definition.
2-Person Control
Check this box to indicate a two-person rule is imposed for this
area.
When checked, two or more people must be in the area at times
when occupied. When the area is empty, two valid cardholders
must present their credentials to the entry reader before entry is
granted. Once occupied by two or more people, individual
access can be granted. The same rules apply for exit until two
cardholders are left in the area; at this point, both cardholders
must present their credentials and exit the area together.
Partitions Select one or more partitions from the partitions list. This includes
those partitions in this area definition.
Only those partitions currently defined for this system appear in
this list.