Avigilon Access Control Manager - Avigilon Workflow Guide - Manual (Page 108)

104
• Unacknowledged Alarms window includes all those alarms recorded by the system that
have not yet been acknowledged or addressed.
• Acknowledged Alarms window includes all those alarms that were initially listed in the
Unacknowledged Alarms window but have subsequently been acknowledged and placed
in this window.
Each of these windows contains the following default columns:
This indicates that the alarm has a camera associated with it.
You can use the and buttons to view live or recorded video
at the site associated with this event.
Priority Displays the urgency of this alarm where 1 is the most urgent and 99 is the least urgent.
Priorities are normally assigned to a specific event using the Priority field on the Event
Add page.
When Displays the date and time when this alarm was issued.
Count Indicates the number of times this alarm was issued.
Status Indicates the status of this alarm.
Source Displays the device (such as a reader or input) that issued this alarm.
Event Name Displays the name of this alarm (event). This name can be changed or assigned to a
specific alarm using the Name field on the Event Add page.
Last Name Displays the last name of the person responsible for creating the alarm. This is almost
always the person who used a card or code to enter or exit a supervised area.
First Name Displays the first name of the person responsible for creating the alarm. This is almost
always the person who used a card or code to enter or exit a supervised area.
Card No. Displays the card number that caused the alarm to occur. This is usually the number of
the card used to enter or exit a supervised area.
Message Displays a message associated with this alarm. Messages are normally assigned to a
specific alarm using the Instructions window on the Event Add page.